OSO SAGA S

Unbeatable performance and pioneering design

SAGA series can be installed anywhere thanks to its pioneering design features, covering all pipings and connections. SAGA has been developed with high grade material selection and intelligent technical solutions exclusive to OSO. SAGA boasts class-leading insulation capabilities resulting in considerable energy savings, while maintaining a higher temperature than others (75 °C) for unbeatable performance and more hot water in a smaller unit.

SAGA — S is suitable for most hot water requirements and comes standard with ultra-grade INCOTEC immersion heater as well as SOLAR option. OSO SOLAR kit (add-on) connects to a separate ½” connection, in combination with solar collectors. Alternatively, this can be useful as hot water circulation or as direct hot water draw-off connection. SAGA is also available with OSO iQ–CONTROL which lowers tank temperature during period with low consumption, resulting in considerable energy savings. Adjustable hot water draw-off temperature (prevents scalding) to the taps is ensured by the factory fitted UX mixing valve with maximum water flow rate of 0,7 L/s.

WHY CHOOSE SAGA?
• Reduce heat loss by 300 kWh* / year with NANOPUR*
• Higher temperature and optimal design gives up to 20 % more hot water
• 5 year warranty on the stainless steel pressure tank
*Compared to 200 L cylinder with EPS insulation

Advantages

Components

Weight 120 kg
Dimensions 2.5 cm
OSO SAGA SC150 QVE SECTIONVIEW 2 e1612271475167OSO SAGA S200 QVE SECTIONVIEW e1612269045890OSO SAGA S250 QVE SECTIONVIEW e1612269017943OSO SAGA S300 QVE SECTIONVIEW e1612269805122
SpecificationsUNITS 150 – 3kW / 1 x 230 VS 200 – 3kW / 1 x 230 VS 250 – 3kW / 1 x 230 VS 300 – 3kW / 1 x 230 V
Identification
Product no.OSO8080455280804554 8080455580804556
Product nameS 150 - 3 kW / 1 × 230 VS 200 - 3kW / 1 x 230 VS 250 - 3kW / 1 x 230 VS 300 - 3kW / 1 x 230 V
UsageNot applicableNot applicableNot applicableNot applicable
PlacementFloorFloorFloorFloor
Dimensions
Diameter — ⌀mm580580580580
Height - Hmm950126015101710
Weightkg31394451
Packagingmm595 × 595 × 1055 595 × 595 × 1555595 × 595 × 1755
Freight volumedm33730,47 m³0,56 m³0,63 m³
Technical/ErP information
Capacitypersons2.53.54.55.5
Capacity 40°CL251355442539
VolumeL143194242287
Heat-up time ΔT 65°Chours5,47,36,17,2
Thermostat set point°C70757575
Heat loss-EN 12897watt53667986
AEC (energy consumption)kW/yearNot applicableNot applicableNot applicableNot applicable
Energy efficiency%Not applicableNot applicableNot applicableNot applicable
Tapping profile3XS–XXLNot applicableNot applicableNot applicableNot applicable
Energy ratingA+–FBCCC

Advantages

MORE HOT WATER
Substantially higher temperature (70°C+), highly efficient mixing valve (no scolding), minimal heat loss and optimal design features gives up to 20 % more hot water and class leading capacity.

PRO INSULATION
The use of NANOPUR™ with insulation values far surpassing Pentane, often in combination with VACUUM panels, ensures minimum heat loss and class leading energy efficiency.

STRONGER
EVERLAST™ titanium alloyed stainless steel in combination with OSO’s unique ULTRAWELD™ system and state-of-the-art passivation process equals class leading corrosion resistance.

LIGHTER
EVERLAST™ titanium alloyed, high tensile strength, stainless steel equals lower weight and efficient use of resources. OSO products are more than 40 % lighter than enameled products.

BUILT TO LAST
INCOTEC™ el. immersion heaters with ultra high-grade Incoloy 825 stainless, DZR brass, zinc-free soldering and carefully calculated surface loads results in maximum durability in hard water.